Projektberichte

The aim of the project is the coverage of rural and/or suburban regions with multimodal services, which are more attractive for customers and economically more efficient than conventional public transport, accessed by foot, bike&ride or park&ride, and at the same time ecologically and socially more sustainable, than the sole use of motorised individual transport. Harald Buschbacher, Gerald Kelz, Edith Hartmann, Stefan Kirschbichler, Christian Obermayer
Herausgeber: BMVIT
Deutsch, 232 Seiten

Downloads zur Publikation

• Final Report (pdf, 7.70 MB)

The proposed study analysed the impact of Industry 4.0 on the transport and logistics sector, also with regard to the foreign trade links of the Austrian economy. This analysis therefore offers a sound basis for the formulation of differentiated economic and transport policy recommendations as well as strategic recommendations. Mag. Wolfgang Lueghammer, Mag.(FH) Wilhelm Schachinger, Mag. Dr. Wolfgang Schwarzbauer, et al.
Herausgeber: BMVIT
Deutsch, 117 Seiten

Downloads zur Publikation

• Final report (pdf, 3.17 MB)
• Interim report (German, 33 pages) (pdf, 1.45 MB)

The objective of the project was to apply the EU regulations 2009/661/EC (contains new tyre noise limits) and 2009/1222/EC (noise labelling of tyres) to Austrian conditions in order to find the actual feasible noise reduction, as well as suggestions of how to adapt the Austrian calculation basis. DI Manfred Haider, DI Reinhard Wehr, Dott. Ing. Marco Conter, Ing. Gerhard Strohmayer, DI Heinz Hoislbauer
Herausgeber: BMVIT
Deutsch, 74 Seiten

Downloads zur Publikation

• Final report (pdf, 4.45 MB)
• Summary (German, 2 pages) (pdf, 107.27 kB)

The MobLab Study supports the exploration of emerging urban mobility laboratories in Austria, in order to reduce the gap between the research results of the rigid environment of a laboratory and the implementation practice by offering a targeted accompanying of new Living Labs as user centred innovation settings as well as an evaluation of the gained insights. Martin Berger, Linda Dörrzapf, Gert Breitfuß, Michael Poglitsch, Andrea Stickler, Vanessa Sodl, Elias Remele
Herausgeber: BMVIT
Deutsch, 53 Seiten

Downloads zur Publikation

• Final Report (pdf, 10.13 MB)
• Summary (German, 2 pages) (pdf, 217.16 kB)

The project “Querdenken quer denken” (Creative Thinking on Crazy Ideas) includes, besides a scientific support for the projects that receive the support in the currently open call for person’s mobility, an analysis of whether and to what extent existing financial instruments consider ideas, concepts, and implementation as well as perspective that reaches beyond the borders of specialized disciplines. Ao.Univ.Prof. Mag. Dr. Günter Emberger, DI Ulrich Leth , Mag. Susanne Wolf-Eberl, Odilo Seisser
Herausgeber: BMVIT
Deutsch, 97 Seiten

Downloads zur Publikation

• Final Report (pdf, 1.25 MB)
• Summary (German, 7 pages) (pdf, 265.25 kB)

In pro:motion, methods from social sciences are applied in order to identify homogeneous groups of shared mobility-related information needs and to extract appropriate group-related arguments (e.g. health, environment, costs, image, adventure) in order to create incentives for active mobility. Dr. Beatrix Brauner, Mag. Karin Bauer, Mag. Martin Mayr
Herausgeber: BMVIT
Deutsch, 113 Seiten

Downloads zur Publikation

• pro:motion - Topology report (pdf, 1.78 MB)

11th International Conference on Persuasive Technology (Persuasive Technology 2016), Workshop Empowering Cities for Sustainable Wellbeing, Salzburg, Austria Millonig, A., Markvica, K., Haufe, N.
Herausgeber: Springer - Verlag Berlin Heidelberg 2011
Englisch, 11 Seiten

Downloads zur Publikation

• The Drive to Walk: Identifying Milieu - based Persuasion Types for Motivating Active Mobility (pdf)

The aim of the WIFAS study is to develop a conceptually and empirically sound model to capture the social effects and/or impacts caused by subsidy programmes –Thus, by working out appropriated indicators and by conceiving a rating system which is suitable fort he analysis of a variety of impact dimensions, with special emphasis on ecological effects. Mag. Peter Kaufmann, Laurenz Wolf, MSc, Mag. Alex Schubert, Dr. Alexander Neumann
Herausgeber: BMVIT
Deutsch, 154 Seiten

Downloads zur Publikation

• Final Report (pdf, 6.86 MB)
• Summary (pdf, 176.22 kB)
• Anhang: Soziale Wirkungen der Gütermobilität (german, 1 Page) (pdf, 260.66 kB)
• Weitere Downloads einblenden
• Anhang: Soziale Wirkungen der Personenmobilität (german, 1 page) (pdf, 261.25 kB)
• Anhang: Präsentation Vernetzungsworkshop zu FuE Dienstleistungen aus dem Themenfeld Gütermobilität in Mobilität der Zukunft, 27.6.2014 (KMU Forschung Austria und netwiss GmbH, german, 7 pages) (pdf, 673.71 kB)

An awareness of the value and benefit of taking an interdisciplinary approach to the treatment of challenges facing the Mobility of Goods has only developed to a certain extent, which is why interdisciplinary results are still hard to come by. External stimuli are usually required to open up introverted specialist debates on the phenomena that occur, to motivate a collaborative accomplishment of tasks and as such to mobilise innovation processes. Dipl.-Ing. Dr. rer. nat. Heinz DÖRR; Viktoria MARSCH, Bakk.techn.; Dipl.-Ing. (FH) Andreas ROMSTORFER; MA Yvonne TOIFL, BSc
Herausgeber: BMVIT
Deutsch, 157 Seiten

Downloads zur Publikation

• Final Report (pdf, 3.61 MB)
• Summary (german, 8 pages) (pdf, 715.58 kB)
• Workshop presentation (german, 10 pages) (pdf, 1.60 MB)

The study ecomTraf analysed the impacts of the relation between consumer needs, the offers of online retailers and the CEP (courier-express-parcel) service industry on the development of the overall transport system. Mag.(FH) Doris Gierlinger, Dr. Marike Kellermayr-Scheucher, Dr. Oliver Koll, Dr. Maria Kreuzer, Dr. Max Herry, DI Norbert Sedlacek
Herausgeber: BMVIT
Deutsch, 67 Seiten

Downloads zur Publikation

• Final report (pdf, 3.17 MB)
• Summary (German, 8 pages) (pdf, 395.18 kB)
• Workshop presentation (German, 4 pages) (pdf, 280.94 kB)

The objective of this project was the elaboration of the handling instruction for the adaptation of conventional existing bridges to integral bridges by means of a survey of the national and international literature as well as statistical examination taking essential parameters into account. In addition to the essential construction details of the integral or semi-integral bridges (e.g., frame corner and concrete hinge) the deformable slip plate will also be examined and design rules will be suggested. O. Univ.-Prof. Dr.-Ing. habil. Nguyen Viet Tue, Dipl.-Ing. Regina della Pietra, Dipl.-Ing. Stefan Oberwalder et al.
Herausgeber: BMVIT
Deutsch, 332 Seiten

Downloads zur Publikation

• Final report (pdf, 10.36 MB)
• Short report (German, 2 pages) (pdf, 566.50 kB)

In practice the use of pre-stressed concrete sleepers is often accompanied by cracks-occurrence, such as longitudinal, lateral and shrinkage cracks. At the occurrence of cracks the resistance of sleepers to environmental influences is reduced.By the development of a combined fibre reinforced high-strength concrete, the risk of a formation of micro- and macro cracks can be substantially reduced, whereby the expected lifetime of concrete sleepers can increasing significantly and a costly renovation can be avoided. Dr.- Ing. Sandro Weisheit, Dipl.-Ing. Gregor Metzler
Herausgeber: BMVIT
Deutsch, 85 Seiten

Downloads zur Publikation

• Final report (pdf, 6.04 MB)
• Summary (German, 2 pages) (pdf, 444.71 kB)

The purpose of the study was to link the performance obtained from respective drive technologies, which are in various stages of their technological development up to ready-to-use models, of utility vehicles to the services offered by logistics providers and freight carriers to their customers. Dipl.-Ing. Dr. rer. nat. Heinz Dörr, Kevin Hillen, MSc Viktoria Marsch, Bakk.techn. Dipl.-Ing. (FH) Andreas Romstorfer, MA Yvonne Toifl, BSc , et al.
Herausgeber: BMVIT
Deutsch, 252 Seiten

Downloads zur Publikation

• Final report (pdf, 8.71 MB)
• Summary (German, 7 pages) (pdf, 245.07 kB)
• Workshop presentation (German, 18 pages) (pdf, 2.29 MB)

The study "INCOM-F" aimed to reduce the complexity between the actors (transport action and transport performance) of the freight mobility as well as to analyse its challenges (e.g. technical barriers as incompatible transport systems, lacking interoperability, different data formats etc.). The therefrom obtained results, allow the contracting entity to identify the most important actors and hence address promising RTI-topics in future national research calls. 07/2014
Dr. Sandra Stein, Dipl.-Ing. Georg Brunnthaller; Dipl.-Ing. Dr. rer. nat. Heinz Dörr; et al.
Herausgeber: BMVIT
Deutsch, 152 Seiten

Downloads zur Publikation

• Final report (pdf, 3.47 MB)
• Summary (German, 3 pages) (pdf, 398.32 kB)

Within the scope of this research project a mechanically consistent model for the shear resistance of bridges without or low shear reinforcement was developed. Dipl.-Ing. Patrick Huber, Univ.-Prof. Dr.Ing. Johann Kollegger, Univ.-Prof. Dr.Ing. Viet Tue Nguyen, Dr.-Ing. Duc Tung Nguyen
Herausgeber: BMVIT
Deutsch, 251 Seiten

Downloads zur Publikation

• Final report (pdf, 8.13 MB)
• Summary (German, 2 pages) (pdf, 209.20 kB)

Combined transport (CT) is an environmentally sensible and politically desired traffic, which is struggling with cost problems due to complicated supply chains. Previous innovations in CT have focused much on the development of new transhipment technologies. These innovations were very expensive and resulted in the medium term partly to a further increase in the cost of the supply chain. The intention of this study includes a redesign of the transport and business processes, the compatibility of interfaces (with orientation towards homogenization and standardization) for the individual actors and an adapted technological development of intermodal transport containers (containers, SAL, WAB). 06/2014
DI Alexander Chloupek (ABC Consulting)
Herausgeber: BMVIT
Deutsch, 50 Seiten

Downloads zur Publikation

• Final Report (pdf, 1.96 MB)

The project ODIMAK dealt with a new capacity analysis method for multi-level intersections based on existing guidelines. Measurements of complex weaving procedures on the ASFINAG network were taken into account. A microscopic traffic simulation tool was applied to develop an analysis method for multiple weaving segments. The traffic flow model was calibrated using the previous measurements. Typical geometrical settings were defined and modeled. The simulation results are taken for regression analysis to identify suitable dimensioning procedures, which were discussed within the FSV committee on intersections. DI Michael Cik, Prof. Dr.-Ing. Martin Fellendorf, DI Roland Fenzl, DI Erich Gaube, DI Dr. techn. Georg Kriebernegg
Herausgeber: BMVIT
Deutsch, 100 Seiten

Downloads zur Publikation

• Final report (pdf, 3.46 MB)
• Summary (German, 7 pages) (pdf, 955.23 kB)

Within this project, performance-based material behaviour of Hot Mix Asphalt (HMA) was implemented in the Austrian design approach. Considering actual asphalt mechanic behaviour, as well as specific traffic loads and climatic conditions, the structural technical life time of road pavements with different bitumen, bitumen systems and mix design could be determined and considered in the design process. In addition, a standardized life-cycle cost analysis helped to evaluate and identify the economic differences between alternative pavement types. The results of this project should be the basis for a complete revision of the Austrian pavement design standard, RVS 03.08.63. Univ.-Prof. DI Dr Ronald Blab, DI Lukas Eberhardsteiner, DI Katrin Haselbauer, DI Bettina Marchart, DI Torsten Hessmann
Herausgeber: BMVIT
Deutsch, 147 Seiten

Downloads zur Publikation

• Final report (pdf, 3.28 MB)
• Summary (German, 2 pages) (pdf, 433.04 kB)

This research project analyzed how a noncompliance with requirements or has a negative effect on the freeze-thaw resistance of concrete pavements. Dipl.-Ing. Dr. Martin Peyerl, Dipl.-Ing. Christian Dillig, Mag.(FH) Dipl.-Ing. Dr. Stefan Krispel
Herausgeber: BMVIT
Deutsch, 151 Seiten

Downloads zur Publikation

• Final report (pdf, 8.09 MB)
• Short report (German, 2 pages) (pdf, 485.32 kB)

The aim of the project was to determine correction factors for noise barriers with complex geometries to be used in the ray-tracing method based on numerical simulations with the boundary element method. The results of the simulations were validated by measurements. Complex geometries of the noise barriers included barriers with more than one refraction edge and curved geometry. The expected correction factors allow the implementation of the results in standard calculation software used in practice. Dr. Holger Waubke, Dr. Christian Kasess, DI Heinz Hoislbauer, Ing. Gerhard Strohmayr, Dipl. Phys. Dieter Zollitsch
Herausgeber: BMVIT
Deutsch, 147 Seiten

Downloads zur Publikation

• Final report (pdf, 4.61 MB)
• Summary (German, 2 pages) (pdf, 154.41 kB)